Guide: How to record a message using our sound recorders

Recording a message on your Be My Bear sound recorder is quick and simple.  Please take a look at the instructions below.

  • To start the recording, turn the dial on your sound recorder to the position marked "R" (which stands for record) and then hold down the large central button. A red light should become illuminated on the side of the sound recorder which indicates that the recording process is now active.
  • To stop the recording, simply release the large central button and then turn the dial on your sound recorder to the position marked "P" (which stands for play). Press the large central button to hear your recording played back to you.  If you are happy, hold down the large central button for approximately 12 seconds until you hear a beep.  The sound recorder is now locked to stop accidental erasure of your recording.
  • To play the recording, make sure the dial on your sound recorder is in the position marked "P" (which stands for play), and then press the large central button. The recording will then be played back to you.
  • To unlock the recording so you can record a new message, make sure the dial on your sound recorder is in the position marked "P" (which stands for play), and then hold the large central button for approximately 12 seconds until you hear 2 beeps. The sound recorder is now unlocked and the recording can be erased.
  • To turn off your sound recorder, make sure the dial on your sound recorder is in the position marked "O" (which stands for off). Your sound recorder is now off and safe for storage.
Only logged in customers can submit questions